
Add to Cart
160m3/h 300m3/h 100hp Vertical Multistage Electric Water Deep Well Submersible Pump
160m3/h 300m3/h submersible pump models:
(Note: flow rate, head meters, material, power supply, a suitable submersible pump model according to your requirements)
Model | Power | Flow range | Head range | |
QJ type | kw | hp | m3/h | m |
250QJ160-15/1 | 13 | 18 | 148-172 | 44548 |
250QJ160-30/2 | 22 | 30 | 148-172 | 25-35 |
250QJ160-45/3 | 30 | 40 | 148-172 | 38-51 |
250QJ160-60/4 | 45 | 60 | 148-172 | 52-69 |
250QJ160-75/5 | 55 | 75 | 148-172 | 65-86 |
250QJ160-90/6 | 63 | 85 | 148-172 | 77-103 |
250QJ160-105/7 | 75 | 100 | 148-172 | 90-120 |
250QJ160-120/8 | 90 | 120 | 148-172 | 102-138 |
250QJ160-135/9 | 100 | 135 | 148-172 | 115-155 |
250QJ160-150/10 | 110 | 150 | 186-214 | 128-170 |
300QJ300-20/1 | 25 | 35 | 279-321 | 17-23 |
300QJ300-40/2 | 55 | 75 | 279-321 | 35-45 |
300QJ300-60/3 | 75 | 100 | 279-321 | 51-69 |
300QJ300-80/4 | 110 | 150 | 279-321 | 68-92 |
300QJ300-100/5 | 140 | 190 | 279-321 | 96-104 |
300QJ300-120/6 | 160 | 220 | 279-321 | 115-125 |
300QJ300-140/7 | 185 | 250 | 279-321 | 134-146 |
300QJ300-160/8 | 220 | 300 | 279-321 | 153-167 |
160m3h 300m3h submersible pump specifications:
1. Outlet diameter: 5" 6"
2. Flow rate: 160m3/h 300m3/h submersible pump
3. Head rate: 30m 60m 80m 105m 120m 200m submersible pump
4. Motor power: 75kw 100hp submersible pump
5. Power supply: 3phase 380v/400v/440v/460v/480v/600v; 50hz/60hz
6. Material: Cast iron/SS304/SS316/SS316L/duplex stainless steel/SS904L
7. Temperature: 0-90℃
Elerctric submersible pump applications:
1. Farm agricultural irrigation system
2. Pumping sea water, offshore, jack-up, reservoir, lake, salt water, river, mine
3. Pumping clean water
4. Pumping hot water
Working conditions of water submersible pump:
1. Three-phase power supply, voltage 380V (error less than 5%), frequency 50Hz (error less than 1%).
2. Motor must be filled with clean water.
3. Water temperatureshould not higher than 20 ℃.
4. Sand content of the water (by quality) not more than 0.01%.
5. Water PH 6.5~8.5.
6. The content of hydrogen sulfide in watershould not be more than 1.5 mg/l.
7. The content of chloridion in water shouldnot be higher than 400mg/l.
8. The water source must provide enough water for the pump to work continuously
Water submersible pump features:
1. Large capacity, high head
2. Motor and pump are integrated, simple structure
3. Easy to install, use, disassemble and maintain
4. Taking little floor space
5. No pollution to water source
6. Continuous operation 2500 hours per year
7. Average life is at least 5 years