10 Inch 100hp Multistage Deep Well Water Electric Submersible Pump

10 Inch 75kw 100hp 80m3/h 200m Cast Iron Verical Multistage Deep Well Water Electric Submersible Pump

Water submersible pump applications:

1. Deep well

2. Farm irrigation

3. Mining drainage

4. High-level builsing

5. Fishery

6. Water fountain

7. Sea water lifting, offshore, shipyard, floating dock, salt water

Electric submersible water pump spare parts details:

1.Impeller: with strong anti - winding and no - blockage performance, smooth operation after dynamic balance test ; smooth over current surface , large channel section , high efficiency and no blockage ;
2.Pump shell: pump shell is a single shell, distributed around the impeller to collect liquid; pump shell and impeller with easy to replace the wear-resistant ring;
3.Shaft: pump and motor coaxial, compact structure, shaft extension as short as possible, from the design to reduce deflection, running vibration, sealing and bearing life longer;
4.Sealing: two sets of independent mechanical seals, so that the motor and pump seal isolation; up and down series installation, provide double insurance, improve reliability;
5.Lubrication: Oil lubrication isolates the motor from the delivered medium and acts as the cooler seal ;
6.Protective device: submersible sewage pump has multiple monitoring and protection devices, can lead the lead to the electronic control box. Protective devices include: overload, phase deficiency, leakage, overheating, humidity, immersion protection.

How to choose a suitable water submersible pump types, the most important steps for submersible pump running well:

100hp water electric submersible pump models:

Electric water deep well vertical submersible pump working conditions:

1) The power supply is 50Hz, 380V three-phase AC power supply;

2) The water temperature shall not be higher than 20℃;

3) The solid content in water (calculated by mass) is not more than 0.01%;

4) The hydrochloric acid degree pH value of water is 6.5~8.5;

5) The chloride ion content in water is not more than 400mg/L;

6) the depth of submersible pump into the water is not greater than 70m.

The above conditions are the basic conditions of use, if the use of conditions beyond the scope of the above, can be made special, to ensure the normal operation of the pump.